
Alpha Line Lab Business, a laboratory safety integrated management company.
The work I'm going to show you this time is replacing
the domestic clean bench filter that Acunos is using.
Alpha Line Lab Business has a long-standing know-how
and technology for filter replacement, so not only simple replacement
From actual measurement to fabrication and replacement of
filters to complete the entire process of replacing the clean bench filter at once
It's a systematic one-stop care.

Replacement of the Core HEPA Filter (HEPA Filter) filter
to maintain cleanliness of the clean bench.
The filter that I was using was very contaminated
The air circulation structure of the clean bench is that
the air introduced through the pre-filter is purified by the HEPA filter
After passing through the experiment, it is discharged in the direction of the operator.
If contaminants accumulate in the filter, not only
contamination of the experimental sample but also infection of the worker
Periodic clean bench filter replacement is recommended as it may cause situations.
※ The maximum life of the HEPA filter is about two years, but depending on the
experiment, frequency of use, and environmental factors
It may vary, so it is recommended to replace it once
a year (approximately 3000h used).

To maintain the cleanliness of the clean bench, before the main filter, HEPA filter
The scene of a pre-filter replacement used as the primary processing filter.
The pre-filter is in contact with the outside and acts as
a pretreatment of the main filter, and dust, floating matter, etc. in the atmosphere
Remove 10 to 30μm particles that harm the human body.
The pre-filter filters the incoming air first, so the pollution
rate is faster than the main filter.
It is recommended to replace the pre-filter once every 6 months to 1 year
If you continue to use prefilters that have passed the
replacement period, it will affect the circulation of air
Periodic replacement checks are recommended as
they may cause damage to the blower motor or even contamination of the main filter.

In the Alpha Line Lab business, a differentiated signature, Simple Validation
It is free of charge to all users who have requested the
replacement of the clean bench filter.
Simple validation is an item corresponding to IQ and
OQ for the purpose of managing its own equipment
We will verify and measure the installation environment,
noise, illumination, horizontal, airflow, wind speed, and
particles and write the results as a report.
※ According to the KDCA's guidelines for verifying bio-safety
research facilities of Grade 3 and 4, bio-safety research facilities
and safety equipment are
Management such as maintenance shall be performed continuously
and re-verification shall be performed periodically.
Periodic re-verification is recommended once for one to two years.It says that.

Alpha Line Lab Business will attach a history sticker
after replacing the clean bench filter.
We will record your management history, so anyone can
easily check your management history even if the
person in charge of equipment management changes.
We also give you a unique customer number, so we will help you manage it later.
All fieldwork for the Alpha Line Lab business is
accompanied by a professional, experienced Field Manager
Follow the safety guide manual that controls the entire operation.
As a laboratory safety integrated management company
with 29 years of experience, with many years of know-how and technology
We always provide the best solution for you.
#AlphaLine #AlphaLineLabBusiness #CleanBench #BSC #BiosafetyWorkBench #CleanBenchFilter #BSCFilter #BiosafetyWorkBenchFilter #CleanBenchFilterReplacement #BSCFilterReplacement #CleanBenchHepaFilter #HepaFilter #FilterReplaceHepaFilter #Filter #Filter #BiFilter #FilterReplacementHepaFilter #BiFilter #BioFilterFilter #BiFil #アルファラインラップビジネス#無菌作業台